STRUCTURAL
Industrial Coatings & Corrosion Protection
Surface preparation, protective coatings, fireproofing, and pipe wrapping in the shop or field, inspected by AMPP-certified coating inspectors.
AMPP
certified coating inspectors on staff
Shop & Field
coating application
Fireproofing
plus protective coatings and wrapping
0.0
TRIR and DART rate
Protection That Starts With Surface Prep
Coating performance depends on surface preparation as much as on the coating itself. Spector Services handles abrasive blasting, power tool cleaning, and water jetting, then applies epoxy, zinc, polyurethane, and other coating systems, plus fireproofing, in the shop or in the field.
AMPP-certified coating inspectors on staff verify the work, and we install tape wrap, petrolatum, heat shrink, and other wrapping systems on piping. Because Spector also fabricates structural steel and installs piping, coatings can be part of the same scope instead of a separate subcontract.
What We Do
Spector crews handle the full coating and corrosion protection scope.
- Abrasive blasting
- Power tool cleaning and water jetting
- Epoxy, zinc, polyurethane, and other coating systems
- Fireproofing
- Tape wrap, petrolatum, and heat shrink wrapping
- Flange wax
- Shop and field application
Capabilities at a Glance
Surface Preparation
Abrasive blasting, power tool cleaning, and water jetting.
Coating Systems
Epoxy, zinc, polyurethane, and other systems as specified.
Fireproofing
Fireproofing for structural steel and equipment supports.
Wrapping
Tape wrap, petrolatum, heat shrink, and other systems on piping.
Inspection
AMPP-certified coating inspectors on staff.
Shop and Field
Coating application in the shop or in the field.
How We Deliver Coating Work
STEP 1
Review the Specification
We review coating specifications, surface preparation standards, and fireproofing requirements before pricing.
STEP 2
Prepare the Surface
Surfaces are blasted, power tool cleaned, or water jetted to the specified standard.
STEP 3
Apply
Coatings, fireproofing, or wrapping systems are applied in the shop or field, as the project requires.
STEP 4
Inspect
AMPP-certified coating inspectors verify surface preparation and application against the specification.
STEP 5
Turn Over
Coated steel and piping are turned over ready for service or for the next trade.
Safety You Can Verify
Coating work combines abrasive blasting, chemical products, and work at height. Here is the record Spector Services brings to it.
0.0 TRIR and DART
No recordable injuries and no days-away, restricted, or transferred cases.
A Grades
Rated A on both ISNetworld and Veriforce.
Dedicated Safety Personnel
Safety staff dedicated to Spector’s field operations.
Site-Ready Crews
Field crews carry TWIC cards and Safety Essentials/Basic Plus training.
What to Send for a Coatings Bid
A complete package gets you a faster, tighter number. Send what you have, and we will ask for anything else we need.
- Coating specification and system
- Surface preparation standard
- Surface area, linear footage, or piece count
- Fireproofing requirements
- Shop or field application and site access
- Inspection requirements
- Schedule
FAQ
Coatings Questions
Quick answers for owners and general contractors planning coating work. Have a question that isn’t covered here? Talk to us directly.
Abrasive blasting, power tool cleaning, and water jetting, matched to the standard your specification calls for.
Epoxy, zinc, polyurethane, and other systems as specified, plus fireproofing.
Yes. We have AMPP-certified coating inspectors on staff.
Both, depending on the project and where the steel or piping is when it needs protection.
Yes. We install tape wrap, petrolatum, heat shrink, and other wrapping systems.
Related Services
Planning Coating Work?
Send the coating specification, surface areas, fireproofing requirements, and schedule. We will review the package and follow up with questions or a bid.